LBNZ counter-flow integrated asphalt mixing plant

Energy saving | Stability | Environmental protection | Safety

Get a free quote

400-887-7788

Find a Dealer

Service Support

LBNZ counter-flow integrated asphalt mixing plant

NFLG's counter-flow integrated asphalt mixing plant is a new generation of high-proportion plant-mixed hot regeneration energy-saving and environmentally friendly asphalt mixing equipment newly developed by the company. Full heat exchange, special regeneration system design, regeneration addition ratio up to 70%, native regeneration integrated design structure, quick installation, recycled material automatically falls into the mixer, non-stick material, large finished product bin at the bottom, finished product material trolley travels in two directions; it can be realized with functions such as raw, large-scale regeneration, foamed asphalt, and cold addition of recycled fine materials.

Counter-flow heating of recycled materials has high thermal efficiency and low fuel consumption

Steel structure hot blast furnace has low noise and low maintenance cost

A large proportion of recycled materials is added, and the economic benefits are considerable

Fully environmentally friendly design

Cold aggregate bin

The belt feeder can be frequency-controlled according to output settings and ratio requirements.

The sand bin is equipped with internal vibration arch breaking and air cannon arch breaking devices, eliminating the need for manual digging of materials.

Configured with sound and light alarm function for material shortage.

Vibration screen

The vibration screen shell is covered with insulating rock wool for noise reduction and heat preservation.

The vibration motor directly drives the screen body, with high transmission efficiency, maintenance-free and long life.

Screening efficiency ≥95%, screen tension can be identified, easy to operate.

Hot aggregate bin

Each bin is equipped with a continuous material level meter and a temperature sensor is installed in the sand bin.

Configured with online sampling port, safe and convenient.

The discharge door is a long and short double door design with coarse and fine discharge functions.

Mixer

High-speed flexible synchronous drive, three-dimensional mixing, high mixing efficiency.

Wear-resistant blades and liners imported from Sweden, super wear-resistant.

Interfaces reserved for adding thermal regeneration, wood fiber, foam asphalt, etc.

Counter flow drying drum

The recycled material temperature is higher, the exhaust gas temperature is lower, energy saving and high thermal efficiency.

Heating with furnace hot air for uniform heating; waste heat recovery, energy saving and consumption reduction.

RAR addition ratio can reach up to 100%.

Intelligent CNC burner

The system intelligently adapts to the combustion modes of different working conditions and oil products, making it worry-free and efficient.

Patented technology for aggregate temperature measurement, one-button operation, self-adjusting parameters, easy operation.

Intelligent control scheme, accurate temperature control, stable combustion and low emissions.

Model	LBNZ2000	LBNZ3000	LBNZ4000		LBNZ5000
Number of original cold bins×capacity	5×20m³	5×20m³	6×20m³		6×20m³
Number of regenerated cold bins×capacity	3×9m³	3×9m³	3×9m³		3×9m³
Original drum size: diameter x length	2.25m×9m	2.5m×10m	2.8m×11m		2.9m×12.5m
Regeneration drum size: diameter × length	1.7m×8m	2.2m×9m	2.5m×11m		2.5m×14m
Original maximum drying capacity (moisture content 5%)	160t/h	240t/h	320t/h		400t/h
Regeneration maximum drying capacity (moisture content 3%)	240t/h	240t/h	240t/h		240t/h
Fuel	Light oil/heavy oil/natural gas (optional)
Dust removal method	One-level gravity dust removal + two-level bag dust removal
Mixercapacity (optional larger model)	5.5t	6.5t	6.5t		6.5t
Mixing method	Horizontal twin-shaft forced mixing
Finished product warehouse	19m³+19m³	22m³+22m³	28m³+28m³		30m³+30m³
Control system	Cloud interconnection, dual-machine dual-control system
Regeneration addition ratio	50%
	The addition ratio can be determined based on factors such as raw material gradation, original reproduction capacity, mixing time, etc.
Standard original rated capacity	160t/h	240t/h		320t/h	400t/h
Standard regeneration rated capacity	220~240t/h	220~240t/h		220~240t/h	220~240t/h
Standard regeneration addition ratio is 50% of production capacity	280~320t/h	400~440t/h		400~440t/h	400~440t/h
Optional reproduction capacity	180t/h，240t/h	180t/h，240t/h		180t/h，240t/h	240t/h

Standard working conditions: ambient temperature 20°C, standard atmospheric pressure, primary aggregate moisture content ≤5%, recycled material moisture content ≤3%, aggregate temperature rise 140°C, mixing cycle 45S, medium-grained mixture.

Downloads

《LBNZ counter-flow integrated asphalt mixing plant》

Chinese

Contact Customer Service

English

Contact Customer Service

Russian

Contact Customer Service

Engineering mixing

Concrete Mixing Plant

Asphalt Mixing Plant

Dry Mortar Mixing Plant

Crushing and sand making

Aggregate shaping & sand making

Mobile crushing and screening

Static crushing and screening

Solution

Overall solution for solid waste resource utilization

Green building materials overall solution

2024 bauma China

LBNZ counter-flow integrated asphalt mixing plant

Cold aggregate bin

Vibration screen

Hot aggregate bin

Mixer

Counter flow drying drum

Intelligent CNC burner