NFI1111RS Tracked Mobile Impact Crushing Station

Home / Product / Crushing & Screening Equipment /NFI1111RS Tracked Mobile Impact Crushing Station

NFI1111RS is mid-sized impact crusher designed to offer operators and contactors both excellent reduction and high consistency of product shape for performance in quarry and recycling applications. NFI1111RS features a 3350mm x1525mm screen and recirculating (SR) conveyor which returns oversized product to chamber for further reduction. With track mobility both plants are capable of working in the most demanding environments and features a rapid set up time, fuel efficient direct drive system and excellent through output capacity.

  • Parameter
  • Characteristics
  • Standard Parts
ApplicationAggregate and solid waste processing, quarry primary and secondary crushing.
Capacity230tph  Material is based on limestone with bulk density 1.6t/m³ Practical capacity depends on raw material feeding size, mesh size and material conditions.
Hopper capacity3.6 m3
8 m3(Option)
Rotor sizeφ1040mmX1100mm
Maximum feeding size450mm
Discharge setting range20-75mm
PowerCAT C9/242KW
Transportation size16220mm X 3100mm X 3440mm

Three layers screen whose size is 6.1m x 1.525m, and operation channel beside the screen.

Vibratory plate feeder under the chamber which can aids material discharging and reduces crusher blockages.

Modular conveyor with raise/lower facility to aid clearance of rebar

Economical to operate with a highly fuel efficient direct drive system

Load management system to control feeder speed

Fully hydraulic assisted apron setting features makes adjustment of the aprons convenient and efficient

Heavy duty vibrating feeder with integral pre-screen removes dirt fines and sizes bypass material for reprocessing

Efficient direct drive crusher chamber is supplied with 4 bar rotor as standard. 3 bar rotor is option.



World well-known brand water-cooled engine 242kW (325Hp)


Impact chamber

Direct drive via HPTO clutch and V-belt


Hopper capacity: 3.6m3

Heavy duty vibrating screen with pre-screen

Stepped grizzly feeder 42m spacing as standard, mesh aperture on grizzly feeder 30mm

Selectable discharge to by-pass conveyor or main conveyor

Main conveyor

Feed boot with wear resistant liners

Guards on the main conveyor

High spec scraper at main conveyor head drums


Piped for dust suppression

Galvanized handrail, board and ladders

Two speed tracking with soft start

Low lubrication degree requirements

Emergency stop (4nr)

Manual controller with rope

Safety guards in compliance with machinery directive


Maximum capacity is based on limestone with bulk density 1.6t/m³. Screen capacity depends on the screen size and material gradation.


Quotation Online

Online Quotation